Weblog

Tuesday, 13 May 2008

  • PT. SUKSES ADHI MULTI PERKASA



    COMPANY PROFILE

    Pada   tahun 2006   PT Sukses  Adhi  Multi  Perkasa   mulai   berdiri,   dan mengembangkan usaha dalam  Trading / Perdagangan  khususnya  bidang supplayer untuk alat industri dan pengeboran.
    Perusahaan kami juga melayani pengadaan pembelian , maintenance juga repairing untuk alat industri dan pertambangan.
    Manajemen  kami  dipimpin  oleh  personal-personal yang profesional dan
    memiliki integritas yang tinggi dalam industri ini yang sudah beroperasi
    di taraf nasional dan internasional. Pengadaan  tepat waktu serta standar
    harga yang negotiable menjadi point prioritas kami. Link-up kami dengan perusahaan internasional di Eropa, Amerika maupun Asia memberikan kemudahan dalam hal pengadaan barang barang dan jasa yang di butuhkan.



    Visi Perusahaan
     
    Menjadi perusahaan trading yang terbaik
         (Leading Trading Company)
    Menjadi profesional guna
      memberi dasar kepercayaan
        bagi para mitra

    Motto Perusahaan  
    BE FUTURE TRADING


    PEKERJAAN YANG KAMI KERJAKAN:

            1. Drilling & Worksover Rigs : Cooper, Ideco, Nationall
            2. Mud Pump : National, Gardner Denver
            3. Accumulator Unit : Koomey
            4. Blow Out Preventer (BOP) : Hydrill, Cameron, Shaffer
            5. Instrument : Martin Decker, Totco
            6. Tube : Tubing, Casing, Line Pipe
            7. Pipe : Drill Collar, Drill Pipe, Cross-Subs
            8. Tools : Ridgid, Elora
            9. Swivel Joint : FMC, Best
          10. Valve : Cameron, WKM, Demco, Oteco
          11. Hyd. Hose : Dunlop, Gate, Aeroquip.
          12. Hyd. Pump : Vickers, Commercial.
          13. Axle Diff : Eaton, Rockwell, Mack.

    LEGALITAS PERUSAHAAN

        DEPARTEMEN HUKUM DAN HAM 
            No c-20039 HT.01.01.th2006
        SIUP 
            No 503/4058A/436.5.9/2006
        TDP
            No 503/5365D/436.5.9/2006
        NPWP
            No 02.257.070.9-607.000


Monday, 12 May 2008

  •  SALE CARDWELL S BACK-IN TRAILER MOUNTED RIG
    SALE CARDWELL S BACK-IN TRAILER MOUNTED RIG
    (Gambar)
      SALE
    This rig has just completed a drilling project and is immediatelyavailable for sale. It is located in South Texas. Depth capacity is5,000 ft.

    Price : $1,500,000
    Exclude Shipping cost
    		Sell 3NB1000 triplex single-acting mud pump
    3NB1000 triplex single-acting mud pump The designing characteristic of 3NB1000 pump is the optimum parameter, appropriately increasing stroke, reasonable lower stroke number to prolong the life...


    		Sell NG 30-5 mud circulating system
    NG 30-5 mud circulating system, the newly designed products is suitable for the rig for 3000meters. It consists of a sand collector, 3 mud circulating tanks, a mud reservation tank and a big medicine...


    		Sell emsco F series mud pump spare parts
    Shandong Rongli Petroleum Machinery Co., Ltd is a direct manufacturer of Triplex drilling mud pump and their spare parts. We produce all the spare parts for F series drilling mud pump&3NB series...


    		Sell triplex single acting mud pump (F1600)
    Product Description F-1600 mud pump is applicable to the requirement of high pump pressure in the oilfield and large flow technology of well drilling with its solid and compact structure, small...


    		Sell Mud Pump(EMSCO) Spare Parts
    Shandong Rongli Petroleum Machinery Co., Ltd is a direct manufacturer of Triplex drilling mud pump and their spare parts. We produce all the spare parts for F series drilling mud pump&3NB series...


    		Sell triplex single-acting mud pump
    Shandong Rongli Machinery Co.,Ltd is a standard enterprise certified by ISO9001: 2000. The products and main parts are strictly manufactured according to standard of API SPEC 7K ISO14693. And the
  • Drilling Rig Rotary / Bor Pile
    Drilling Rig Rotary / Bor Pile
    (Gambar)
      Series of SANY Rotary Drilling Rig.
    -The series of SANY Rotary Drilling Rig are hi-efficiency pore-creating drilling equipment for pile foundation contruction, suitable for base foundation construction such as high-rise buildings, bridges and hydraulic construction.
    -Due to the adoption of CAT C-9 (CATERPILAR) electrojet turbine engine with supercharged intercooler, it has high reliability and economical fuel consumption.



    U-34 DRILLING RIG (Ref#15145N) U34 drawworks with hydromatic brake powered
    by 8V92 Detroit engine, 103' x 300,000# Lee C. Moore derrick, crown sheave
    29" x 1-1/2", GXN 16" Gardner Denver mud pump skidded and reskidded w/Matco
    Fluid end powered by 12V91 Detroit engine, 2-piece subbase 6'6", 2 piece
    pony sub 43'. (1) 22" x 11' x 36" Kansas type base, 2-piece catwalk, 100
    ton 3 sheave block, Ideal type F swivel with quick change packing, rathole
    digger complete, Brewster 17-1/2" ball type rotary table, Wilson AAX tongs,
    8' x 20' doghouse, Shaffer BOP, 10' x 25' water tank, (2) pipe baskets, 40'
    kelly, kelly bushing, centrifugal pumps, duplex pumps, derrick stand, cone
    type desander, 4200' of 4-1/2" x 3' drill pipe Price:

    U-34 (Ref#1322N) Mid Continent U-34 drawworks w/Cat 3406C diesel engine,
    Allision Torque TC-955, 101' x 165,000# Lee C Moore double derrick, 12'
    one-piece substructure, 365 barrel mud tank, combination building light
    plant/change house, Oilwell A560PT triplex mud pump w/Series 60 Detroit
    diesel engine, 2 new pipe tubs, catwalk Price:

    UNIT 34 (Ref# 3212N) 103' LCM Derrick 300,000 lb Crown 6 Sheave 29" x 1 ½"
    6 x 6 5/8" Thick Angle Iron, U34 Draw works w/hydromantic brake powered by
    new 8v92 Detroit Rebuilt Right Angle Drive Torque Converter New Line, GxN
    16" Garner Denver Mud Pump Skidded & Reskidded w/mato fluid end powered by
    12v92 Detroit rebuilt with day tank, Two piece sub base 6'6", Two piece Pony
    sub 43' – 1 22" x 11' x 36" Kansas Type Base, Two Piece Cat Walk 40', 100
    Ton 3 Sheave Block, Ideal Type F Swivel with Quick Change Packing, Rat Hole
    Digger Complete, Brewster 17 ½" Ball type Rotary Table, Set Wilson AAx
    Tongs, 8' x 20' Doghouse, Shaffer BOP, 10' x 25' Water Tank, Pipe Baskets,
    40' Kelly, Kelly Bushing, 100KW Kato Generator, Centerfugal Pump 20 HP
    elec., Duplex Pumps 4 x 6 Wheatley Power 4 cyl John Deer Diesel, Derrick
    Stank, Desander Cone Type, Tandem Dolly Trailer for Derrick, Set 4 ½" Slips,
    Bottom Hole Change Over Sub, Mud Hopper, Tanks 100 gal. Oil, 100 gal Diesel
    Tank, V Door, 3 Sets of Steps Price:

    UNIT 15 (Ref#4044N) 1000hp - Refurbished rig, 95% new
    DERRICK 500,000# SHL Full Circle Enterprises, Inc. Triple 142' Tall 18'6"
    Spread Beam Style Derrick
    SUBS 16' Tall 53' Long Box on Box . Each Box 8' Tall 7' Wide 53' Long
    300,000# Set Back Capacity
    DRAW WORKS Completely refurbished U15 w/Large Jack Shaft & Air Clutches
    Powered by 2 new 14Litre60 Series Detroit 620hp each with oil well torque
    converters, Quincy Air Compressor mounted on Compound. Motor Shed Included
    MUD PUMPS 2 – New F-1000 Style Chinese Triplex's Powered by New 3508
    Caterpillar Engines with pulsation dampeners and all plumbing.
    GENERATORS 2 – 400KW Marathon Generators w/John Deere power mounted in 8"w
    40' long Generator House with all switch gear and electrical wiring.
    TRAVELING & ROTATING EQUIPMENT 250 ton Block & Hook Combo 10 Line, 250ton
    Swivel, 27 ½" Rotary Table w/bushings, Basch Ross Hex Kelly Drive Bushing
    MUD SYSTEM
    SHAKER PIT 47'Long 12'Wide 6'Tall 600bbl capacity with 3 compartments; 1
    Derrick Agitator and fitted with Derrick 503FLC Shaker
    SUCTION PIT
    37'Long 12'Wide 6'Tall 475bbl capacity with 3 compartments w/slug pit or
    premix, 3 derrick agitators, 10' porch with Double Life hopper on top & 2
    electric derrick centrifugal 5x6 mud mixing pumps & shed over porch
    (Pits are completely plumbed for suction and fresh water and equipped with
    guns for stirring. 1075bbl total capacity)
    BUILDINGS & TANKS
    TOP DOG HOUSE 45' Long 8'Wide w/Knowledge Box, Tool Room, Lockers &
    Heater, Refrigerator and Microwave
    BOTTOM DOG HOUSE & PARTS HOUSE 40'Long 8'Wide wall in middle, 20' Parts
    Room w/shelves & work bench, 20' Changing Room w/lockers, bench & heater
    WATER TANK 46'Long 9'Tall 8'Wide 500bbl capacity
    PUSHER LIVING QUARTERS 40'Long 8'Wide w/Shower in Bathroom, Refrigerator,
    Microwave, and heating and air
    CATWALK 2 Pieces – 29'Long 6'Wide 29"Tall 58' total length w/Loading
    Hitches & Pipe Chalks
    PIPE RACKS 4 Racks 25'Long, 2Racks 15'Long w/Pipe Chalks
    WELL CONTROL EQUIPMENT
    ACCUMULATOR 4 Station 8 Bottle Graco w/electric & air Pump
    BOP'S 11" 5000# Annular & 11" 5000# Double pipe & blind rams
    MUD CROSS 11" 5000#
    CHOKE MANIFOLD 6-Valve 2 Choke 5000# Capacity mounted on adjustable skid
    TUBULARS
    DRILL PIPE 10,000 G105 16.60
    DRILL COLLARS 20 – 6 ¼" W/ 4 ½ XH Connections
    KELLY 46' 5 ¼" Hex
    HANDLING EQUIPMENT
    Set Tongs, Set 250ton 4 ½" DP Elevators, Set 6 ¼ DC Slips, Set 8" DC Slip,
    Set 4 ½ DP Slips, Safety Clamp, 10 – XH DC Handling Subs, Saver Sub for
    Kelly, Upper Kelly Valve, Lower Kelly Valve, 6" Bit Sub
    WIRELINE EQUIPMENT 5 – Star Survey Machine w/ 15000' wire and counter,
    electric over hydraulic
    ASSORTED EQUIPMENT (2)2X3 Centrifugal Water Pumps mounted in subs, 60'
    Kelly Hose, Screw Type Air, Compressor mounted in sub, Air Hoist mounted on
    top sub, Set Air Pipe Spinners, Drilling Line Stand w/5000' 1 1/8 Drilling
    Line

    Rig is completely plumbed and wired. Price: $10,500,000

    GARDNER DENVER 500 WITH ROSS HILL MODEL 1010 SCR (Ref#14624N)
    DRILLING DEPTH 2,500M. BY 4 1/2" DRILL PIPES
    SCR UNIT
    ROSS HILL MODEL 1010 (1996 ) WITH THREE (3) BAYS, COMPLETE UNIT
    DRAWWORKS:
    GARDNER DENVER MODEL GD500E (650HP) SINGLE DRUM DRAWWORKS, DRILLERS CONSOLE,
    CATHEADS, GROOVED FOR 1 1/8" WIRE ROPE, HYDROMATIC BRAKE . GE 752 DC
    MOTOR.
    DERRICK
    TELESCOPING MAST 98 FT. CLEAR 30M,
    HOOKLOAD 350,000 LBS, W/ 8 LINES & SETBACK LOAD 200,000 LBS
    DRILL FLOOR 9 FT (2.75M),
    PACKING BOARD 4 1/2' DRILL PIPE 9,000 FT (2,750M)
    SUB BASE
    TWO FLOORS BOX ON BOX
    #1 UPPER DRILL FLOOR, DRILLER SIDE, L=39' W=9' H=9' (TOOL HOUSE)
    #2 LOWER BOX, L=39' W=9' H=10' (WATERTANK,70KL)
    #3 UPPER DRILL FLOOR, ROTARY SIDE, L=39' W=9' H=9'
    ( HARISBURG LINER MOTTING SAKER / SWECO LINER AND ACCELERATIVE MOTTING
    SHAKER / 2-10" CONES DESANDER / 8- 5" CONES DESILTER )
    #4 LOWER BOX, L=39' W=9' H=10' (MUDTANK,70KL)
    TWO SETS STAIRS, AND HANDRAILS
    MUD PUMPS
    GARDNER DENVER PZ-7 W/ GE 752 DC MOTOR.
    3 CYLINDER/ SINGLE ACTION / PISTON TYPE / 550HP
    CENTRIFUGAL PUMP
    TWO (2) CENTRIFUGAL PUMPS,
    (1) FOR FRESH WATER SUPPLY
    (2) FOR DESANDER AND DESILTER SYSTEM
    SHAKER
    (1) HARISBURG LINER MOTTING SAKER
    (2) SWECO LINER AND ACCELERATIVE MOTTING SHAKER
    BLOCK/HOOK WILSON 250 TON SHORTY/BLOCK HOOK GROOVED FOR 1 1/8"
    ROTARY TABLE GARDNER DENVER 27 1/2"
    SWIVEL OIL WELL SWIVEL PC 300 / QUICK CHANGE
    DOG HOUSE 7 FT.WIDE X 9FT. HIGH X 32 FT. LONG WITH PORCH. KNOWLEDGE
    BOX, SHELVES, BENCHES & 4-LOCKERS. CRIMP STEEL WALLS
    MUD MIXING HOPPER
    CUTTING TANK
    AIR CRANE TWO AIR CRANES ON DRILL FLOOR 3TONS CAPACITY EACH
    KELLY
    DRILL PIPE 4 1/2" DRILLPIPE 200 JOINTS
    COLLAR 6" COLLAR 8 JOINTS
    STABILIZER FOR 12 1/4" & 8 1/2" THREE EACH
    ELEVATORS ELEVATORS FOR DRILL-PIPE & DRILL COLLARS AND CASING
    SLIPS FOR 4 1/2"DRILL-PIPE & DRILL COLLARS AND CASING
    POWER TONG TWO SETS (1) FOR 3 1/2" / 4 1/2" DRILL PIPE (2) FOR 9 5/8" / 7"
    CASING
    REGAN BOP
    AIR COMPRESSOR 2000-PSI AIR RECEIVER
    GENERATOR
    (1) 1000KW , 220 – 600 VOLTS, 60HZ, THREE PHASE
    (2) 125 KW DANYO
    INSTRUMENTATION CHART DRILLING RECORDER, WEIGHT INDICATOR
    MISC. TWO SETS OF PIPE RACKS, TONGS TYPE BJ- B W/ 3 ? ?10 ? JAWS, SEVERAL
    JOINT SUB

    PRICE: $2,500,000

    GARDNER DENVER (Ref#5113Nc)
    5,000 to 6,500 ft Single Top Head Drive
    CARRIER: 4 Axle Crane Carrier
    DRAWWORKS: Gardner Denver 350/400 HP Rated @ 250,000 lbs.
    Drawworks Motor - 325 HP John Deer with 5 Speed Allison Automatic
    Transmission (New)
    Hydromatic - 15-1/2" Double w/ Closed System
    DERRICK: 65' / 200,000 lbs Hoisting Capacity
    SUB: 8' Floor w/ Rig on 2' ramp
    Substructure w/ Cat Walk & Hydraulic Pipe Handler (New)
    MUD PUMPS:
    Two (2) D-375 Emsco Mud Pumps with Rebuilt Cat D-363 Motors
    And 22" WPI Clutches. Pumps have been rebuilt (Gear ends)
    And all New Pumps Expendables - 1 hole. All plumbing,
    Valves & Popoffs (New). Mud pumps motors have remote radiators w/ electric
    fans
    GEN SETS: Two (2) 350 KV Generators, Gen Set 12.4 liter John Deer with
    Magna Max Generator (New)
    TOP HEAD DRIVE HOUSE:
    One 325 HP John Deer Motor with Hydraulic pumps to run Top Head drive and
    Pipe Handler
    88 TON King power swivel, operated by an independent diesel engine and
    hydraulic package
    Hydraulic Tank (ALL NEW)
    DOG HOUSE:
    #1 Gen Set and Top Head Drive motor mounted on one skid.
    Dog House raised to floor height.
    All new Building and All equipment
    TRANSFER TANK:
    Two Compartments 40 bbl Tank with 3 screen Derrick Shaker
    75 HP Dae-Woo Diesel Motor w/ 5x6 Mission Centrifugal transfer pump
    New Motor - Rebuilt Pump
    MUD TANK:
    450 bbl Mud Tank w/ Enclosed Hopper
    All New Valves w/ 2 - 50hp pumps for Hopper, Guns, and Charging Mud pumps
    One 50hp Electric 5x6 pump for reserve Pit - New Motor
    WATER TANK:
    400 bbl Tank w/ New 2x3 Mission Pump
    10 HP Car washer / New Steam mounted in Enclosed
    New Tank, Pump and Car Washer
    GEN SET BUILDING #2:
    Has Parts House and Crew Change Quarters
    BOP:
    1. 3000# 9' Shaffer Rebuilt 22' High Double Gate
    1. 2x2 Mud Cross
    1. 3000# 4 Station Accumulator - Rebuilt
    1. 3000# Double Chole Manifold - New
    All Valves on Mud Cross and choke manifold included
    With 300' of 2" Flare lines and line weights
    TOOLING:
    Tong-22" General Machine Tongs 2-3/8" - 7" (New)
    All Slips and DC Clamps (New)
    12-1/4 to 6" Bit Breaker
    Two 3-1/2 IF Kelly Cock Valves (new)
    One 3-1/2 IF String BOP (new)
    One complete Set Rig Hand Tools (New)
    One 2" Gas Trash Pump (New)
    CAMPS:
    12' x 42' Toolpusher Trailer - Remolded
    with Bed and Bedding, Full Kitchen Setup, Microwave, stove,
    Refrigerator, TV, furniture, washer and dryer (ALL NEW)
    14' x 60' - 8 Man Camp brand new, never used, with bedding, TV,
    Microwave Refrigerator and Furniture
    Trailer Transformer for power Distribution to other trailers (NEW)
    TUBULARS:
    4700 ft of 4-1/2" drill pipe - 20# / ft
    6500 ft of 3-1/2" drill pipe - 16.5# / ft
    16-6" drill collars

    Price for rig only: $925,000.00
    Price for complete rig: $1,600,000

    GARDNER DENVER 3000 TRAILER MOUNTED DRILLING RIG (Ref#5481N) Depth
    capacity: 4,000' with 4-1/2" drill pipe, Double drum drawworks, 85' x
    110,000# two piece hydraulically raised and scoped mast, 17-1/2" rotary
    table, 6V71 Detroit diesel on deck, Gardner Denver 7 ½ x 10 duplex mud pump
    with 471 Detroit diesel engine, Mounted on 3 axle truck, 4 leveling jacks on
    rig, 2 leveling jacks for mast, Racking board, Kelly hose, Travelling block,
    Kelly and kelly bushing, Hook, block, swivel, Clean condition, Located in
    Mexico Price: $750,000

    MAYHEW 2000 DRILLING RIG (Ref#14901N) Depth Capacity 3000', Gardner Denver
    2000 drawworks with twin air actuated clutch, each drum has (2) 6" wide
    brake flanges, sandline drum available, right angle gearbox with 3 speed
    transmission, ¾" grooving on each drum, Foster Spinning cathead, mounted on
    1975 GMC tandem axle truck with 8V71N Detroit diesel engine, Fuller 10 speed
    transmission and Fuller 3-TA 92 auxiliary transmission with full torque,
    PTO, 4 hydraulic leveling jacks, 60' hydraulically raised Mayhew mast with
    pipe racking board for staking 30' drill pipe, (2) 3-sheave travelling
    block, 671N Detroit on deck with torque converter, both drums have ¾" six
    lines with dead lines, Martin Decker weight indicator, National T-12 swivel,
    3-1/2" x 36' square kelly, chain pulldown, 7-3/4 ID Mayhew rotary table,
    drill floor that hinges up for transport, Web Wilson type D tongs 2-3/8" OD
    – 8-5/8" OD, Gardner Denver FXO duplex mud pump, mounted on truck with
    diesel engine and Fuller transmission (all new expendibles in pump)
    Support equipment and additional equipment:
    Casing elevators for 4-1/2", 5-1/2 and 8-5/8"
    Pipe slips for 2-3/8" – 8-5/8" pipes
    2000' of 3-1/2" x 30' 13.30 lb per foot drill pipe with 3-1/2" IF joints
    (5) 5-5/8" drill collars with 4" FH (1collar has 4-1/2" API reg box bored
    for float valve on bottom)
    12-1/4" bit sub
    Change over from bit sub to –1/2" IF box
    Kelly saver sub 3-1/2" IF box x 3-1/2" IF pin
    Bit breakers for 7-7/8", 8-3/4", 11" and 12-1/4"
    Measuring line for running straight hole instrument
    A1 7 degree deviation instrument
    Webco 2 pin drilling time recorder
    8-5/8" casing landing joint
    Tandem axle 30' long flat bed
    Pipe trailer with 1000 x 20" 10-hole bud wheels and tires
    Lowboy trailer with 1000 gal. diesel tank
    Air compressor with 5 hp 208 volt electric motor
    10 kw electric generator powered with 2-53 Detroit diesel
    (2) 85 gal oil storage tanks
    (3) tool and spare parts storage boxes
    8' wide x 24' long steel doghouse with 10 steel lockers
    Knowledge box with storage cabinet under box
    One end of doghouse has work bench with drawers and storage cabinets

    Price: $425,000

    FAILING STRATMASTER 100 (Ref#1628N)
    1. Drawworks: G.E. Failing Co, Stratmaster 100 – single drum grooved
    for 1" wireline, 32" x 10" brake flanges and Parkersburg Hydromatic brake,
    drum clutch, twin disc air actuated PO-218 with single line pull of 18,030#
    all mounted on skid, chain driven drawworks modified to enclosed oil bath
    type chain boxes.
    2. Compound: Gear box – right angle drive series 600 to drive drum,
    Drop box – rotary drive. All tube torque drive line.
    3. Engines: 1 unit Isuzu 10po1 330ps x 2500 rpm with type "C"
    mechanical transmission.
    4. Substructure: G.E. Failing Co. design – 8 ft. working space under
    rotary table – modified, pinned to rig skid.
    5. Hydraulic power: 1 auxillary 25 gpm commercial shearing gear pump,
    coupled drive from Isuzu engine, 1-45 gpm commercial shearing gear pump
    driven by 20 HP electric motor mounted on rig.
    6. Rotary table: 20-1/2" opening with no. 3 insert bowl driven by twin
    disc PO-211 air clutch/chn
    7. Water swivel: Skytop 4 SX 120 ton
    8. Mast: Lee Industries – Beaumont, Texas. 97 ft. mechanical raised, 2
    section telescoped type gross load rating 300,000 pipe racking platform for
    range 2 doubles, capacity for 5000 ft of 4-1/2" drill pipe
    9. Crown block: Structural steel plate construction 6" x 30" OD,
    sheaves grooved for 1" diameter wireline
    10. Hook block: BJ 100 ton Unimatic 30" x 4 sheaves
    11. Kelly: 3-1/2" x 40 ft. HEX
    12. Kelly drive: 3-1/2" HEX
    13. Mud pump: 1 unit Oilwell A560PT Triplex belt driven by Cat 3412
    475hp x 1200 rpm engine with electric starter, engine clutch 18CB-500,
    - Super charged by electric driven 4 x 5 centrifugal pump
    - Electric driven liner wash centrifugal pump
    - 2" pressure gauge
    - 4" stand pipe valve
    - 2" bleed valve
    - 2" pressure relief valve, all mounted on discharge line
    All skid mounted in steel building
    L 13.7m x W 2.4m x H 2.6M
    14. Mud system: Skid mounted steel construction tank, 240 BBL
    capacity 3
    compartments, complete with mud cleaning and mud mixing
    equipment,
    5 x 6 centrifugal pump, hopper, mud jets, desilter, agitator in
    mixing
    compartment
    15. Shaker: Double screen Swaco driven 5HP electric motor, mounted on
    mud tank
    16. Desilter: Drilco 12 x 4" cone mounted in mud mixing room.
    17. BOP's, Accumulator: 1 unit 9" Nominal Regan annulars 3000 psi, W.P.
    18. Instrumentation: 1 unit TSK W-100 weight indicator
    19. Air compressor: 1 unit Meiji GK-75 with r. tank, 0.78~0.88mpa x 840
    ltr. /min
    20. Dog house: Mounted over water tank with tool board & drillers desk.
    L 4.6m x W 2.1m x H 2.1m
    21. Combination building: Steel construction skid mounted, consists of:
    tool house, work shop, change house, power control/distribution house, fuel
    tank 7000 ltr. capacity mounted on house, etc.
    22. Drill pipe
    23. Drill collars: 18 joints 6-1/2" x 2-7/8" 5" pin x H90 box, 2 joints
    9" x 3" 7" pin x H90 box
    24. Misc. handling tools: DC. 9", 6-1/", 4-3/4"~9", various DP/DC slips
    & elevators, BJ C type rotary tongs, CSG elevators, various subs XO,
    lifting, bit, etc., junk box, steel tank.
    25. HWDP: 11 joints heavy weight drill pipe
    26. Vibrator hose: 3000 psig 2.5m
    27. Rotary hose: 5000 psig x 3-1/2"
    28. Rig lighting: Northern rig lights, fluorescent and Halogen lamps,
    sealed and explosion proof throughout.
    29. Pipe racks: 2 sets 30 ft. long tumble rack system
    30. Cat walk (pipe tub): 2 units – square tubing construction skidded 40
    ft. long with pipe bin, capacity 3,000 ft. x 4-1/2" D.P.
    31. Drilling line: 1" x 400m with steel construction rack.
    Converted and refurbished from trailer to skid mounted rig. Immediately
    available for sale in Southeast Asia. Hasn't drilled since 1998. Refurbished
    in 2000.

    PRICE REDUCED $450,000

    FAILING 90 STRATMASTER (Ref#13405) 5,000' depth capacity, double drum,
    double block, mounted on 3 axle trailer 45' long, Cummins 400hp diesel
    engine, 87' x 200,000# Lee C. Moore jacknife mast, cable scoped and cable
    raised, designed as big rig, 18" rotary table, table 4-1/2' from ground, (3)
    mud pumps: Oilwell 7-1/4 x 14 duplex with Faywick air clutch powered by 440
    Cummins diesel engine with 5-1/2" liners, Emsco 7-1/4 x 10" duplex mud pump
    with 350 Cummins diesel engine, with 5-1/2" liners, Oilwell 6 x 12" duplex
    mud pump with Cummins 300 hp diesel engine and 5 speed transmission with
    5-1/2" liners, 1500' of 3-1/2" drill pipe, (7) 4-1/2" drill collars, (6) 6"
    drill collars, 400 bbl laydown water tank, trailer mounted doghouse and near
    new handling tools, no sub, no BOP, no mud tank, good condition Price:
    $700,000

    WILSON 75 COMPLETE RIG 1000HP (Ref#4761N) Wilson 75 drawworks, 136' folding
    angle mast X 500,000#, 12' box on box sub, (6) sheave 1 ½" engine, (2)
    Cummins K-19 draw works engines, Gardner Denver 150 scfm air compressor with
    50hp electric motor, (2) Detroit 350 kw generators, Brewster compound,
    National C-350 duplex pump with Cat 3412 engine, 6" liners x 18" stroke,
    Emsco DA-700 duplex pump with Cat D-348 engine, 6" liners x 16" stroke,
    Upetrom 2PN-1300 duplex pump, 6" liners x 16" stroke, Valvcon accumulator,
    Electric house – 40'L x 8'W x 8'H, Doghouse – 40'L x 8'W x 8'H, Fuel tank –
    12,000 gal – skid mounted, Wilson 300 ton block – Hydro-hook,
    Skytop/Brewster rotary table, Hydrill 11" x 5,000# annular BOP, Hydrill 11"
    x 5,000# pipe/blind BOP, Shaffer choke manifold, (2) Mission Magnum transfer
    pumps, (2) U.S. Electric 60hp electric motors, National P-300 swivel, Water
    tank – 50'L x 8'W x 6'H, (2) cat walks – 40'L x 4'W x 4'H, 6 – pipe racks –
    30'L x 3'W x 3'H, Junk basket – lift subs, bailes, tongs, rotary bushing,
    elevators, Engine oil tank, General motors cable engine, Cable spools, Air
    tank, Parkersburg 5 ton air hoist, Slickline unit – rebuilt hydraulics
    3/2006, Derrick mud tank, dual agitators – 50'L x 12'W x 5'H, Derrick mud
    tank, dual shakers – 40'L x 12'W x 6'H, Tri-cone desander, (5) 8' x 16' x
    10' rig mats, (6) drill collars – 6-1/4" OD x 4-1/2" XH, 248 grade "E" drill
    pipe – 4-1/2" OD x 4-1/2" XH, Extra equipment: Caterpillar 3406 125 kw
    generator, load tested with papers, Cummins 250 kw generator, load tested
    with papers, (2) 2006 Chevrolet C-2500 4x4 trucks Currently drilling
    Price: $4,200,000

    WILSON MOGUL 42 (Ref#8973N)
    DRAWWORKS: (Wilson Mogul 42)
    1. FOSTER Make – up and break out Cat heads
    2. PARMAC 15: Double hydromatic brake ( Rebuilt 2006)
    3. 2,000' +/- 1" drilling line, spooled
    4. Driller's console, with controls
    Power:
    Detroit Model 12V71 diesel engine, Radiator and starter, Allison
    Model TC955 torque converter
    Mast :
    Wilson 96' H x 250,000 # hoisting capacity derrick
    Hydraulically raised with multiple scooping raising arm (Ram
    rebuilt, 2002)
    Crown Block and Safety Platform
    Pipe racking board, Standpipe
    31/2 x 50" long Kelly hose
    Tong counterweights
    Vapor proof lighting
    Martin – Decker weight indicator
    ALL OF THE ABOVE MOUNTED ON A FOUR AXLE DRIVE IN WILSON CARRIER WITH:
    1. (1) Winch
    2. Hydraulic storage tanks
    3. Fuel tanks
    4. Air compressor
    5. Deadline anchor
    6. Hydraulic leveling jacks
    7. Folding walkways, with stairs and safety railings
    Substructure:
    10' H x 8'W x 12' L
    Box type structure, with rotary table beams
    10' W x 40'L back on ramp
    Stairways
    Folding walkways
    Safety railings
    Lighting
    TRAVELING AND ROTATING EQUIPMENT:
    Rotary Table: IDECO Model 175F (rotary table with split
    master bushing
    Swivel: OILWELL Model PC-150, 150 ton capacity swivel
    Kelly: 40'L x 4 1/4" Square Kelly with VARCO Model 4KRVS
    Drive bushing
    Blocks and Hook: McKissick 4 sheave blocks, grooved for 1" line, with
    WEBB-WILSON Hydra Hook Elevator Bales
    TUBULARS AND ASOCIATED EQUIPMENT:
    5,500' +/- 3 ½ OD drill pipe
    Grade E
    Hard Banded
    3 ½ " IF connection
    Tested premium double white band
    (22) 4 ¾" OD drill collars, with 4 ¾" fish neck, 3 ½" IF
    connections,
    slip recessed
    (10) 6 ½" OD x 2 ¼" ID x 31'L, drill collars, with 4 ½" H-90
    connections, slip recessed
    (4) 7' 8"W x 3'H x 36'L pipe tubs, side plate, mud boated
    (1) 7' 8"W x 3'H x 36'L center tub, with walkway and V door ramp
    (2) sets triangular, steel constructed pipe racks
    WELL CONTROL EQUIPMENT:
    (1) Dorland 11" 3000 PSI annular BOP
    (1) Washington Rotating head assembly, complete with 16 ¾" 3000# air bowl
    Companion flange 13 5/8 x 13 3/8 – 8 round
    Companion flange 13 5/8 x 9 5/8 – 8 round
    Companion flange 13 5/8 x 7 inch – 8 round
    Kelly Driver and Oiler
    200' 7" OD flanges steel flow line
    MUD SYSTEM:
    (1) OILWELL Model 214P duplex mud pump
    (1) GASO series 1700 mud pump with Inline Detroit 671 with blower, Rockford
    power take off clutch, 2 ½" x 5" bore 10" stroke
    7 ¼" x 14" mud gauge
    Oteco shear relief valve
    Hydrill pulsation dampener
    MATTCO AP17, steel fluid end with quick change cylinder caps
    Unit complete with all necessary plumbing, piping, valves, gauges and
    controls
    Powered by: SCANIA, type DS14-02 diesel engine, air cooled, with twin disc
    clutch
    All unitized and skid mounted
    (1) 200 bbl capacity mud pit, 8'W x 5' 6"H x 32'L, two compartment with all
    necessary plumbing and valves
    RUMBA single screen Shale shaker
    15' Vibrator hose and mud line
    AIR SYSTEM:
    2001 INGERSOLL RAND Model 1070 CFM, 350 PSI air
    compressor, complete with all necessary collers, gauges, valving
    and
    controls to make complete. Powered by CAT Model 3406 diesel
    engine, enclose and skid mounted.
    INGERSOLL RAND Model 900 CFM, 350 PSI air compressor,
    Complete with all necessary coolers, gauges, valving and controls
    to
    make complete. Powered by CAT Model 3406C diesel engine, with
    radiator and all necessary gauges and controls, skid mounted
    ARIEL Model JG2 booster, 1,000 psi @ 2850 cfm
    Powered by CAT Model 3126 diesel engine, skid mounted
    GENERATOR:
    Caterpillar model SR4, 113 KW generator with all necessary
    Switching gear, gauges and controls, mounted in Generator house.
    RIG HOUSES:
    8'W x 40'L telescoping dog house with generator room, Change
    house and parts storage, fuel storage, SATELLITE automatic driller

    and new geolograph.
    MISCELLANEOUS EQUIPMENT AND PARTS:
    Soap tank with CAT Model 2525 injection pump and lubricator
    Rig water pump 2x3 centrifical with 10 hp elec. Motor
    (2) 13 3/8" single side door elevators
    (2) 9 5/8" single side door elevators
    (1) set of 7" double latch 100 ton capacity casing elevators
    (1) ARROW hammer oil injector pump with fluid holding tank
    (4) 3000# flanges, 7", 9 5/8" and 16"
    (1) 2" air pump
    (1) Gorman-Rupp transfer pump powered by 3 hp electic motor, 500' 2" water
    hose
    (7) 4 ½" H-90 lift subs
    1 set 7" BJ elevators, single side door latch
    (5) 3 ½" IF lift subs
    (10) change over subs
    Dead man stakes and cable for rig tie down and secure lines
    Webb Wilson Type B tongs, 2 3/8" through 10 ¾"
    1 set Web-Wilson T100 3 ½" drill pipe elevators
    1 set Wooley type A drill collar slips
    1 set VAECO 9 5/8" slips
    1 set WOOLEY 4 ½" drill pipe slips
    1 set VARCO 4 ½" drill pipe slips
    RIG IS IN GREAT CONDITION, REPAINTED IN 2006 AND IS CURRENTLY DRILLING IN
    THE MID-SOUTH USA.

    Price: $2,850,000

    WILSON 42B WELL SERVICING RIG (Ref#5327N) Manufactured 1980, double drum,
    22" hydromatic brake, 102' x 250,000# hydraulically raised mast, mounted on
    5 axle carrier, Detroit 8V92T diesel engine, Allison automatic transmission,
    new drilling line in January 2007, 9000' sandline Price: $700,000

    WILSON MOGUL 42 WORKOVER RIG (Ref#1702Nb) Manufactured 1973
    MAST: telescoping mast, type KM 96-250, max. mast height 95 ft 2 in (29 m),
    max. mast capacity 247,000 lbs (112 to)
    WINCH CAPACITY: 6 lines
    CHASSIS: Type WILSON, 5 axles: 2 steerable front axles, 2 driven rear axles,
    1 drag axle, 6 hydraulic leveling jacks
    ENGINE: CATERPILLAR D343 , 310 kW (416 HP) at 2,200 rpm
    DRAWWORKS: WILSON, Mogul 42, Main drum: Lebus groove 1", 1" line, 250 m,
    double band brake, brake rims water cooled, Sandline drum: 5/8" line, max.
    2500 m, double band brake, brake rims splash cooled
    AUXILIARY BRAKE PARKERSBURG: 15" double rotor hydromatic brake
    AUXILIARY WINCH ALBERT: winch capacity 2,760 lbs (1,250 kg)
    TRAVELING BLOCK: not included
    DIMENSIONS & WEIGHT: weight app. 101,400 lbs (46 to), length app. 56
    ft 1 in (17.1 m), width app. 8 ft 2 in (2.5 m), height app. 14 ft
    1 in (4.3 m)
    Price: $500,000

    IDECO H1000 (Ref#10N) Twin Detroit Diesel 12V71, Ideco 112' x 358,000#
    mast, Ideco triplex pumps, T10000 with Cat D398 and T500 with D3408, Ideco
    16' substructure, generator house with (2) Cat D3408, mud system, linear
    motion shakers, 13-5/8" 5000# Hydril triple stack, Ideco Shorty 160 block
    hoo, Ideco TL200 swivel, new drilling instrumentation, Totco drift
    indicator, 30 drill collars, large selection of handling tools, good
    condition, complete rig, was operating overseas Price: $5,400,000

    IDECO H-35 (Ref#6473N)
    Drawworks – Ideco H-35 single drum drawworks, C/W Foster makeup and breakout
    catheads; Lebus grooved for 1" drill line; Ideco right angle rotary drive
    assembly; air and hydraulic operated control panel; water circulated brake
    flanges
    Power – Drawworks powered by (1) Detroit 8V-92 diesel engine complete with
    electric starter, radiator, gauges, driving into an Allision three speed
    automatic transmission
    Mast – Ideco 96' x 212,000# mast, hydraulically raised and scoped complete
    with standpipe, tong counter weights and explosion proof lighting
    Ideco 5 axle back-in mobile carrier; All of the above being mounted on an
    Ideco Back-In Rambler (BIR) series, (5) axle self propelled mobile carrier
    with (2) front and (3) rear axles. Rig is complete with hydraulic pump,
    Bendix Tu-Flo 1000 air compressor, air receiver tanks, hydraulic reservoir,
    fuel tank, tool boxes, and (2) hydraulic and (2) manual leveling jacks,
    deadline anchor, folding walkways and safety rails.
    Water tank – 400BBL. Frac tank with 2" electric transfer pump
    Mud system – Earthen pits 8 ft wide x 90 ft long x 6 ft deep
    Mud pump #1 – TSM 500 H.P. Duplex mud pump powered by a Cat 379 diesel
    engine
    Mud pump #2 – National K380 400 H.P. duplex mud pump powered by Cat 3408
    Generators – 2 new 100 KW John Deere 110/220
    Doghouse – 10' x 30' steel upper doghouse with lockers, storage bin,
    automatic driller, knowledge box with 3 pen geolograph
    Fuel tank – Trailer mounted 2500 gallon fuel tank with steel parts house,
    oil bunker and propane tank
    Block & Hook – Ideco Shorty 110 ton block-hook combo with 4-28" sheaves
    grooved for 1" drilling line
    Kelly 5 ¼" hex kelly with Varco drive bushings

    Drill collars – 16 – 5 ¾" to 6"

    Price: $2,400,000

    IDECO H35 DOUBLE DRUM WORKOVER RIG (Ref#876N) 180,000 lb Derrick, Double
    Triple 96' Derrick, Double Drum Drawworks, 4 line speed block w/ swivel,
    Foster Tongs, Gyberson Double 3000# BOP, Oil Saver & Swabbing Equip., Rod &
    Tubing Elevators & Tools, 5500' of New 9/16" Swab Line, New 1" Drill Line
    (560'), New 5/8 Cat Line, New Tong & Rod Lift Line, New Tires, 8V71 Detroit,
    Transmission, Completely Rebuilt Schuller Front End, New Drive line from
    Front to Back & New Third Member & U-Joints, New Hydraulic Pump w/ Eaton Air
    Clutches, All new Brake Cans, New Rebuilt Tubing Board, New Battery, Starter
    & Gauges, Most air & hydraulic line has been replaced or updated Price:
    $640,000 REDUCED PRICE: $600,000

    IDECO SBS EW 60/14 WORKOVER RIG (Ref#1702Na) Manufactured 1995
    CHASSIS: MAN/ÖAF, 3 axles: 1 driven steerable front axle, 2 driven rear
    axles, leveling jacks: 6 hydraulic jacks, 2 mechanical jacks
    ENGINE: MAN D 2866 LF15, 272 kW (365 HP)
    MAIN DRUM: drum size: diameter 444 mm, width 970 mm, with Lebus grooving
    drum clutch: 30CB525 brake rims water cooled
    AUXILIARY WINCH:2 hydraulic winches, winch capacity app. 4500 lbs (2000 kg)
    each, line diameter 11 mm
    WINCH CAPACITY: 4 or 6 lines
    LINE: line diameter 7/8"
    MAST: single mast, max. mast height 55 ft ( 16.8 m), max. static mast
    capacity 190,000 lbs (86 to)
    TRAVELING BLOCK: DUTB 75224 B, max. load 75 ton
    DIMENSIONS & WEIGHT: weight app. 57,300 lbs (26 to), length app. 50 ft 6
    in (15.4 m), width app. 8 ft 2 in ( 2.5 m), height app. 13 ft 1 in
    ( 4.0 m)
    Price: $635,000

    IDECO H25 (Ref#1366N) Ideco Rambler 16 wheel trailer w/H25 drawworks,
    Cardwell 94' x 150,000# mast w/5 sheave crown, 200 barrel mud tank w/4 cone
    desander, National K500 duplex mud pump w/Cat D353 diesel engine in 10x30
    building, doghouse/water tank building, light plant/combination building,
    catwalk, 2 new pipe tubs, no block, no hooks Price: $2,100,000

    COOPER WORKOVER RIG LTO-350 (Ref#8030N) Manufactured 1979, Double drum
    drawworks, 104' x 225,000# hydraulically raised mast, 42 x 10 main drum, 42
    x 8 sand line drum, Disc Assist Brake, Mounted on 4 axle carrier with
    rebuilt 8V71, Detroit diesel engine, 750 Allison Transmission, Braden winch,
    Tubing Board, Rod basket, Work platform
    TOOLS: 100 TON 3 Sheave Sowa Block, 1 ¾" x 72" Bales, (1) 2-7/8" Tubing
    Elevator, (1) 2-3/8" tubing elevator, (1) Set Cavins B Type Slips, All
    handling tools: Hammer Wrenches, Pipe Wrenches, All Swabbing Equipment
    Price: $925,000
    This rig is currently working in Texas and immediately for sale

    COOPER LTO-350 (Ref#11312N) Double drum, 55' single piece mast, mounted on
    4 axle carrier with diesel engine, rotary tble, 7 x 12' duplex mud pump,
    kelly, swivel, block Price: $570,000

    COOPER LTO-250 (Ref#285N) Double drum, mounted on Mack DH613 tandem axle
    truck with 16000# front axle and 44000# rears, 350 Mack engine, 9 speed
    manual transmission, new decking, (4) new leveling jacks, new 10" x 13"
    winch raised and scoped pole, hydraulic handling winch and tong arm to carry
    5893 R tongs. Price: $535,000
    Also available at extra cost is a 28' new doghouse

    COOPER 26/26 (Ref#14335Nc) Double drum, air shift, 471 Detroit diesel
    engine, manual tansmission, tong hydraulics, single pole 36'9" telescopes to
    46', 3-sheave crown, tubing drum (spool) 26" x 36", 6" brakes, sandline drum
    26" x 36", 6" brakes Price: $145,000

    300 COOPER TC WORKOVER RIG (Ref#14335Na) 1973, Detroit 6V92T engine,
    Harold Lee 72' derrick, manual transmission, full hydraulics, double drum,
    tubing drum 42" x 38" 10" brake, sandline drum 38" x 41" 8" brake, holds
    12000' of 9/16", mounted on 4 axle Crane Carrier Price: $315,000

    WICHTEX C65 (Ref#14335Nb) double drum, air shift, BBC power, manual
    transmission, double pole 35' telescopes to 59', 3 sheave crown, tuving
    drum, 30" x 38", 8" brakes 7/8" line, sandline drum 30" x 41", 7/8" line
    Price: $240,000

    HOPPER GXXTA BACK-IN WORKOVER RIG (Ref#339N) Manufactured 1978, double
    drum, hydromatic brake, Skytop 103' x 180,000# hydraulically raised mast,
    mounted on 4 axle carrier with Cat diesel engine, 5860 transmission, no
    tools or line Price: $675,000

    CHALLENGER 320HT-100 (Ref#13597) 12" - 60" diameter, 600-900 hp, 92' mast,
    Jumbo Buster rotary table, 8V92T Detroit diesel engine, Allison CLT 5860 ST
    transmission, Gardner Denver 6 x 2" mud pump w/Cat 3306 engine, (2) air
    compressors capacity 900 psi, generator, doghouse, (2) pipe baskets, (2) mud
    tanks, mounted on 3 axle Autocar with diesel engine, 2 winches and gin pole,
    2000' of 4-1/2" drill pipe, collars, handling tools, trailer, walkways,
    steps and substructure rails, Currently working in South America, rig
    reworked and in good condition Price: $2,600,000
    Delivery cost to Houston: $120,000

    KREMCO MODEL K600H 5 -AXLE DRILLING RIG (Ref#3635N)
    109' height, 270,000 lb hook load) with Allison trans., p/b, Detroit series
    60 (new '06) engine. Brewster 4SX Swivel (rebuilt '07), 3 1/2 sq. Kelly
    drive bushing (new '07), GD 17 1/2 rotary table, 3 1/2 x 41' sq. Kelly. Skid
    mounted Continental Emsco D-500 mud pump p/b Cat D-379 (rebuilt '06) engine,
    Skid mounted, Continental Emsco D-375 mud pump p/b Cat D-353 engine, Skid
    mounted Cat 155kw gen set (gen end rebuilt '06) p/b Cat 3306 (rebuilt '06)
    engine with parts room and air compressor, Skid mounted power swivel w/
    power unit, heavy duty substructure (scopes to 12'), steel rig mats, 2 steel
    mud pits with agitators, shale shaker, water tanks, doghouse (rebuilt '05),
    annular BOP, closing unit (new motor/pump '06), complete wireline unit with
    counter (unit new '06), deviation tool (new '06), HUL air hoist (rebuilt
    '06), with line (new '06), choke manifold (new and rebuilt valves '06),
    drilling spool, spacer spool, traveling block, all handling tools, air
    operated slips, lift subs, travel trailer, pipe racks, 8,127' of 3 1/2 IF
    drill pipe, and 43 joints of 6" drill collars. Complete and ready to drill.
    Extensive inventory available.
    Price: $3,400,000

    FRANKS EXPLORER III (Ref#883N) 180,000 lb Derrick, Double Triple 96'
    Derrick, Single Drum Drawworks, Detroit 8V71 w/ Allison, 4 line speed block
    No swivel, Peckamatic Tongs, Guiberson Double 3000# BOP, Rod & Tubing
    Elevators & Tools, New 1" Drill Line (560'), New 5/8 Cat Line, New Tong &
    Rod Lift Line, New Tires, New Drive line , U Joints & Third Member, New
    Hydraulic Pump w/ Eaton Air Clutches, All new Brake Cans, Tubing Board, New
    Battery, Starter & Gauges, Most air & hydraulic line has been replaced,
    Rebuilt Drawworks with all new Clutches, Bladders and Bearings Price for
    rig only: $550,000 Price with tools: $700,000

    CONTINENTAL EMSCO GB350 (Ref#1332N) GB 350 drawworks and GB 52 compound w/
    (2) Cat D353 diesel engine, 1" x 7 ½" x 12" brake blocks, Lee C Moore model
    27179, 127' x 300,000# triple derrick, Box by box Lee C Moore, 16'
    substructure, Emsco 175 rotary table, New Cat 3406, 365kw generator, (2)
    tanks mud tank style, 800 barrel, Water tank/ dog house building, 4 new pipe
    tubs, Catwalk, 2 pump house building Price: $3,000,000

    NATIONAL 110M (Ref#5445N)
    15,000-18,000 Ft. DRILLING DEPTH
    MAST 142' FT. Skytop 1,000,000 # SHL Capacity, 25 ft. Leg
    Spread, Racking Board, Boom Line Pole, Tong Weights, Twelve (12) Lines, 1
    3/8" Grooved 6-60"sheaves, & 1-60" fast-line sheave, Derrick shoes Sand
    blasted, primed & painted. 5" stand pipe, (NEW) Raising line. Boom pole (NEW
    & RECONDITIONED), Certified by Superior Derricks
    SUB BASE Twenty Five (25') Foot High Skytop Substructure Box on Box,
    Stairs, Hand Rails, V-Door Ramp. 800,000 # Setback. Capacity, Stair
    landings & escape emergency slide (NEW & RECONDITIONED).
    DRAWWORKS NATIONAL 110M 1500HP, Single Drum Drawworks, Powered by Three
    Cat D-398 Diesel Engines 820 HP Ea., New Catheads, V-200 Hydromatic Brake.
    Driller's Console, National C-300 Torque Convertors (RECONDITIONED LIKE NEW)
    BLOCK/HOOK NATIONAL G500, Six (6) Sheave, 1 3/8"grooved, 500 Ton
    Block, National H- 500 TON Hook-(REBUILT)
    SWIVEL Ideco TL 650 Ton Swivel – (REBUILT)
    ROTARY TABLE National 27 ½" X 53 ¼" Rotary Table with Master
    Bushing (REBUILT)
    DOGHOUSE Top House with knowledge box & four lockers. Shelves, 7' 10"
    wide x 9' high x 32 'long, crimp wall Construction, Sand blasted & primed
    (NEW)
    BOTTOM HOUSE Tool/Change House combination.7'10" W X 9' H X 38' Long. 16
    Lockers. Storage Shelves. Crimp walls. Sand Blasted-Primed (NEW)
    MUD PUMPS Two (2) 1300 H.P. (CHINESE) Triplex Pumps, 1300 HP /w Pulsation
    Dampener, Pop off valves, Master Skidded (NEW) Powered By Caterpillar
    D-399 Diesel Engines (-0-hrs.)
    GEN. HOUSE Two Caterpillar 3412 Diesel Engines W/ 525 Kato 60Hz.
    Generators, Control Panel, Wiring, Air Compressor. All Housed in 11 Ft. W X
    46 Ft., Long X 9 Ft. High, Crimped Wall Construction, Three Runner Oil
    Field, Type Skids. One Engine is New & One Engine (-0- Hrs.) (NEW HOUSE)
    MUD PITS Three (3) Pits, 1,500 Barrel Capacity, Mud Troughs, ¼"Crimp
    wall construction. 4- 5 X 6 centrifugal pumps With Electrical Wiring, 75
    hp Electric motors, Linear Shaker, Desander, Desilter, 5-agitators, Dump
    Gates, Mud Hopper, Hand Rails (NEW)
    DIESEL TANK 10,000 Gallon Capacity. Square, crimped ¼" walls. (NEW)
    WATER TANK 500 bbl .Square. Crimp steel walls Sand Blasted & Painted (NEW)
    MISC. Catwalk 42"H X 5'WX 56'L (Two Sections 25' Long Ea).
    (NEW)
    Three Sets of Pipe Racks 42" high 25' long (NEW)
    Bails 2 ¾" X 132" 500 ton
    5 ¼" Hex Kelly w/Kelly Bushing
    Tongs BJ Type DB with 3 ½"- 10 ¾" Jaws (rebuilt)
    Slips (NEW) drill pipe & drill collar
    Elevators Drill Pipe & Drill Collar (rebuilt)
    Drill Line 1 3/8" New 5000 ft. (NEW)
    Rig-Lites For Sub, Derrick & Mud Tanks (NEW)
    New wiring for rig
    Grass Hopper Trays For Wiring
    CHOKE MANIFOLD 5,000# Manifold, 4" X 2"Values, Adjustable Chokes w/ Stand
    (NEW)
    BOP'S Hydrill GK Annular 13 5/8" 5000# (REBUILT) Certified
    Schaffer 13 5/8" Double LWS 5000# (REBUILT)
    Certified
    CLOSING UNIT Koomey 7-station. Two air pumps & one triplex with
    remote, 220 Gal., Pop off. (Re-Conditioned)
    AIR HOIST Two Ingersole Rand Type (CHINESE Mfg.) K-4 with new wire
    rope (NEW)

    PRICE: $9,800,000 – COMPLETELY REBUILT
    Photos were taken several weeks ago. Anticipated completion October 2007.
    Terms: 50% deposit with order, balance upon completion and before removal
    from yard
    All above equipment will be new or rebuilt with third party warranties.

    NATIONAL T-32 (Ref#15396) rated 5000' with 4-1/2" drill pipe, single drum
    drawworks with Parmac hydromatic brake, minimum 8 lines pull 100 ton, 16" x
    30" main drum, powered by 12V71 Detroit diese (350 hp), mounted on 3 axle
    trailer, 102' x 250,000# Spencer Harris mast, hydraulically raised and
    scoped, racking board, hook, block, swivel, standpipe, hoses and valve,
    Skytop Brewster 27-1/2" rotary table with Varco master bushing, 5-1/4" hex
    kelly, sub and back up ramp, Martin Decker "Clipper" weight indicator,
    doghouse and fuel tank trailer mounted, located South Pacific Price:
    $575,000

    BREWSTER N-4 5,500' DRILLING RIG (Ref#14555N)
    Brewster N-4 single drum drawworks (s/n 555), 1 1/8" line, Foster catheads.
    Powered by Cat D343, new hoses, new air throttle control, new muffler,
    Twin-Disc 11500 torque converter with new torque fluid cooler. Has
    hydromatic with self-contained water tank for use in winter with antifreeze,
    or can be routed from main water supply for normal use. New air compressor.
    *Drawworks was completely dis-assembled, most bearings are new, low clutch
    is new (high clutch
    is like new), brake drums were turned (brake blocks are like new), all new
    air lines and oiler lines.
    Drawworks is ready to use and the engine runs very strong.
    Lee C. Moore 93' "slim" jack-knife 220,000# derrick (s/n 2361), 5 sheave
    crown 1 1/8", tong counter weights, 3 ½" standpipe, new derrick lights and
    beacon light, new tong lines, new catlines, new raising line.
    Ideco 17 ½" rotary table with new drive chain.
    NEW 5'H x 16'W x 35' 2"L substructure with steps & handrails. 2 piece pin
    in the middle sub with 3 spreader bars on bottom. Rolling tailboard on rear
    of sub for easy loading/unloading of drawworks skid without the need of a
    ramp.
    1500' of new 1 1/8" drilling line, new tong lines, new derrick climber line
    & harness and new catlines.
    Emsco D-225 12" duplex mud pump with ALL NEW expendables and new rod oiler
    pump, quick-change valve caps, bolt-on liner heads, suction screen, 8 5/8"
    suction hose, powered by twin Detroit 6-71 engines. Pump is in excellent
    condition and the engines run strong.
    8" BOP with manual closing unit. 10" Reagan is also available.
    4 1/4" Kelly, 37' long.
    Ideco Kelly drive bushings
    New Rat hole/Mouse hole digger assembly and new chain.
    King 10 MB 120 ton swivel with 4 ½ LH connection, with NEW rotary hose.
    Baash-Ross 3-30DBM 100 ton shorty block/hook combo, 1 1/8" sheaves.
    7' 6"W x 7'H x 16'L doghouse, skidded with front & rear porches mounted on
    35' Hobbs flatbed trailer. Includes toolbox and 500 gallon diesel day tank
    mounted on front of trailer. All new fuel lines to run to equipment.
    Remanufactured Geolograph 2 pin drilling recorder (footage & weight on bit).
    Remanufactured Bear automatic driller. Includes all new hoses & fittings.
    Rebuilt Martin Decker Clipper weight indicator.
    4,000 gallon fuel tank, with transfer pump.
    3,800' of 3 ½" drill pipe, grade E, range 2 with 3 ½ IF tool joints. (2)
    pipe tubs. (NOTE: approx 340' need threads recut)
    (9) 6" drill collars, 30'L, 4 ½ FH connections (includes bottom hole
    collar).
    (9) drill collar pick-up subs.
    Handling tools - BJ shorty tongs, d.p. & casing slips, d.p. & casing
    elevators, etc.
    Drill collar safety clamp.
    Misc items – derrick dolly (new lights & wiring ext. cord), vibrator hoses,
    pit jets, v-door, walkway, mud hopper & hoses, new derrick stand.

    Price: $2,100,000

    SPENCER HARRIS 7000 TRAILER MOUNTED SINGLE DRUM DRILLING RIG (Ref#3663N)
    Single drum drawworks, 1-1/8" line, catheads, air clutches, 15" triple
    auxiliary water brake, powered by (2) Cat 3406 diesel engines w/electric
    starter, radiator twin disc torque converter, 2 engine compound, air
    compressor, Spencer Harris 97' H x 250,000# static hook load tubular mast,
    hydraulically raised and cable scoped, all mounted on 3 axle trailer with
    hydraulic utility winch, folding walkways w/stairs. Fuel, air, water and
    hydraulic tanks. Work platform. 100R20 tires, weight indicator, torque
    indicator.
    Substructure:
    9' H x 14'W x 35'L box type substructure rotary beams, V door ramp, stairs
    safety rails, 6' H back on ramp.
    Mud Pumps:
    Emsco D500 duplex mud pump, 500 hp, 7-1/2 x 16" API-7 forged steel fluid end
    with threaded caps, pulsation dampener, 2" shear relief valve, type D
    pressure gauge, V belts w/guard powered by Detroit 12V71 diesel engine,
    w/air starter, radiator, gauges, air clutch, master skidded.
    Emsco D500 duplex mud pump, 500 hp, 7-1/2" x 16" cast forged steel fluid end
    with bolted valves and threaded cylinder head caps, Hydril K20 pulsation
    dampener, 2" shear relief valve, type D pressure gauge, V belts w/guard,
    powered by Detroit 12V71 diesel engine, air starter, radiator, gauges, air
    clutch, master skidded
    Power Unit:
    (1) Cat 3054 hydraulic power unit with quick release hydraulic hose
    connections and 30 gallon reservoir.
    Two Pit Mud System
    5' H x 7'10" x 30'L mud suction tank with single compartment, flat bottom,
    internal plumbing, mud agitator, side mounted walkways, stairs, safety
    rails, skidded
    5' x 7'10" x 30'L mud shaker tank with (2) compartments, flat bottom,
    internal plumbing, side mounted walkways, stairs, safety rails, skidded
    Mud Hopper w/Harrisburg 5 x 6" centrifugal pump powered by 50 hp electric
    motor, skidded
    Halco 5 x 6" centrifugal pump powered by 50 hp electric motor, skidded
    Brandt Mini Cobra triple screen shale shaker
    Brandt 4 cone desilter
    Brandt single cone desanders
    Generators
    Delco 125 kw generator powered by Detroit 671 diesel engine, electric
    starter, radiator, gauges and (1) Delco 100 kw powered by Detroit 671
    diesel, electric styarter, radiator, gauges, vertical mount air compressor,
    electrical control panel, mounted. 75 kw single phase transformer, 8' wide
    x 32' long generator doghouse w/7'L porch on 40' long tandem axle trailer
    Delco 100 kw generator set powered by Detroit 671 diesel engine w/covered
    skid
    Rotating and Travel Equipment
    Brewster 18" x 44" rotary table with split master bushing, Ideal 150 ton
    block/hook combination with 5 sheaves and 1-1/8 line
    Swivel
    Brewster 6SX 220 ton swivel
    Rig houses
    Parts house 8' x 15' rounded top, skidded
    Water/Fuel TanksU
    Fuel tank, 7700 gal horizontal 8' x 20'6" with centrifugal postive pressure
    pump and black iron fuel lines
    500 bbl water tank, mobile frac tank
    Auxiliary Equipment
    Wireline unit, electrically controlled
    3' ID X approx 50' long rotary hose, 5000 psi
    2 (2) 8" ID x 5" L suction hose/vibrator hose
    4'H x 8'W x 30'L junk box, skidded
    Florescent rig lights w/wiring
    Approx. 1000' of 1-1/8" drill line w/spool, stand
    Koomey 3-station closing unit w/(4) 10 gallon accumulators, (2) air operated
    hydraulic pumps, stainless steel flexline, mounted on doghouse porch
    4-1/4" square kelly and square kelly bushing
    BJ type B and Wooley rotary tongs
    Well Control
    Regan 10-3/4" 3000# annular BOP
    Rigged up, cleaned and painted

    Price: $4,200,000

    CABOT 900 (Ref#6098N)
    950hp, 10,000' drilling capacity with 4-1/2" drill pipe
    DRAWWORKS: CABOT 900 DRAWWORKS CABOT MODEL 2346: SINGLE DRUM DRAWWORKS,
    LEBUS GROOVED FOR 1-1/8" DRILL LINE, C/W 12" X 46" WATER CIRCULATING BRAKE
    RIMS, PARMAC V-80 HYDROMATIC ASSIST BRAKE, HYDRAULIC CATWORKS, INCLUDING
    HIGH CAPACITY BREAKOUT CYLINDERS
    DRAWWORKS POWER: TWO (2) CATERPILLAR MODEL 3408 ENGINES PROVIDE THE
    DRAWWORKS POWER WITH EACH ENGINE DRIVING INTO AN ALLISON 5860 AUTOMATIC
    TRANSMISSION, (5 FORWARD & 1 REVERSE).
    CARRIER SPECIFICATIONS: CABOT CARRIER MODEL 900, WITH ALL OF THE ABOVE
    BEING MOUNTED ON CABOT MODEL 900 , SIX AXLE (3 FRONT AND 3 REAR), BACK-IN
    MOBILE CARRIER, C/W HYDRAULIC STORAGE TANKS, TWO (2) BRADEN MODEL PS-12
    HYDRAULIC WINCHES, AIR RECEIVER TANKS, FUEL TANKS, DEADLINE ANCHOR,
    HYDRAULIC LEVELING JACKS AND FOLDING WALKWAYS WITH STAIRS AND SAFETY
    RAILINGS.
    TELESCOPING MAST: CABOT 117' X 365,000# TELESCOPING MAST, RATED AT
    365,000# HOISTING CAPACITY, WITH 4-LEG-SQUARE TUBULAR CONSTRUCTION. THE MAST
    IS HYDRAULICALLY RAISED WITH (2) THREE STAGE DOUBLE ACTING RAMS, AND
    TELESCOPED WITH (2) TWO STAGE SINGLE ACTING RAMS. TELESCOPING MAST IS
    C/W CROWN BLOCK AND SAFETY PLATFORM, PIPE RACKING BOARD, STANDPIPE, DERRICK
    CLIMBER, TONG COUNTER WEIGHTS, 3-1/2" X 65' LONG KELLY HOSE, AND VAPOR PROOF
    LIGHTING.
    SPARE CABOT MAST: "AS IS-WHERE IS" SPARE CABOT 117' X 365,000#
    TELESCOPING MAST, RATED AT 365,000# HOISTING CAPACITY, WITH 4-LEG-SQUARE
    TUBULAR CONSTRUCTION. (NEEDS REPAIR)
    CABOT SUBSTRUCTURE: CABOT "T-TYPE" HYDRAULIC TELESCOPING
    SUBSTRUCTURE- THE CABOT TELESCOPING SUB IS HYDRAULICALLY RAISED, C/W
    DERRICK BASE AND RIG BASE MEASURING 15' HIGH X 12' WIDE X 20' LONG, W/ MUD
    BOAT MEASURING 10' WIDE X 40' LONG, (2)- 5000# PSI MUD LINES, BOP CART AND
    RAILS, STAIRS, WALKWAYS, SAFETY RAILS, LIGHTING AND V-DOOR RAMP AND
    CATWALK. (INSPECTED IN JANUARY, 2007).
    TOP DOGHOUSE: TOP DOG HOUSE/ WATER TANK, (NEW IN 2006),
    MEASURING 7'-6" X 25' LONG, C/W LOCKERS, BENCH, KNOWLEDGE BOX AND NEW PILOT
    MODEL 11 AUTO DRILLER. DOGHOUSE LOWERS INTO A 400 BBL WATER TANK. WATER
    TANK IS COMPLETE WITH (2)- 4" VALVES, AND (1)- 3" X 5" WASH DOWN PUMP. (TOP
    DOG HOUSE & WATER TANK WERE NEW IN 2006).
    TOOL PUSHERS HOUSE: SKIDDED TOOL PUSHERS HOUSE.
    TOOL & CHANGE HOUSE: SKIDDED TOOL HOUSE , MEASURING APPROXIMATELY
    10' X 20, 'C/W STORAGE BINS AND CHANGE ROOM FOR RIG HANDS.
    MUD HOUSE: SKIDDED MUD HOUSE, MEASURING APPX. 10' X 40'
    FUEL TANK: SKIDDED FUEL TANK, C/W KIMRAY FUEL FILTER
    SYSTEM ON SEPARATE SKID.
    TRAVELING EQUIPMENT: ONE (1)- SOWA BLOCK/ HOOK COMBINATION- THE
    SOWA UNITIZED BLOCK-HOOK IS RATED AT 250 TON CAPACITIES, AND GROOVED FOR
    1-1/8" WIRE LINE.
    (INSPECTED IN JANUARY,
    2007).
    ONE (1) IDECO TL-200 SWIVEL- C/W 5-1/4" HEX KELLY & VARCO DRIVE BUSHINGS. .
    CABOT 900 INVENTORY
    ROTARY TABLE: OILWELL 17-1/2" ROTARY TABLE PROPELLER SHAFT
    DRIVEN VIA FULL AIR ROTARY CLUTCH, HEAVY DUTY REVERSE GEAR BOX AND OIL BATH
    ROLLER CHAIN ELEVATED ROTARY DRIVE UNITIZED ON BACK FACE OF MAST AND
    COMPLETE WITH SPLIT BODY MASTER BUSHING AND ONE (1) VARCO TYPE KELLY
    BUSHING FOR 5-1/4" HEX KELLY. (ROTARY TABLE WAS INSPECTED AND REBUILT IN
    JANUARY, 2007).
    WELL CONTROL EQUIPMENT:
    ONE (1)- 11" X 5000# SHAFFER LXT DOUBLE HYDRAULIC BOP, C/W STUDDED TOP &
    STUDDED BOTTOM, AND 4-1/2" & BLIND RAMS INSTALLED. (DOUBLE WAS NEW IN 2006),
    AND (1)- 11" X 5000# DRILLING SPOOL.
    ONE (1)- 4 STATION X 80 GALLON AIR OVER ELECTRIC ACCUMULATOR,
    W/ UNION STYLE TRIPLEX PUMP, W/ 7/8" PLUNGERS, POWERED BY 1- 20 HP ELECTRIC
    EXPLOSION PROOF MOTOR, AND 1 AIR PUMP RATED AT 9 GALLON PER MINUTE. (NEW IN
    OCTOBER, 2006).
    ONE (1)-5,000# CHOKE-KILL MANIFOLD- 5,000# CHOKE KILL
    MANIFOLD, W/ SEVEN (7)- 2-1/16" X 5000# & TWO (2)- 4-1/16" X 5000# MANUAL
    VALVES, AND TWO (2)- ADJUSTABLE CHOKES ALL MOUNTED ON FACTORY SKID, WITH
    CHOKE-KILL MANIFOLD BEING MORE COMPLETELY DESCRIBED BELOW. (NEW IN NOVEMBER,
    2006).
    ITEM QTY
    DESCRIPTION
    #1. 7 Gate Valve, 2-1/16" X 5000# CIF
    Style, FC Type
    #2. 2 Gate Valve, 4-1/16" X 5000# CIF
    Style, FC Type
    #3. 2 Adjustable Choke, 2-1/16" X 5000# H2
    Type
    #4. 1 Cross Studded, (2)- 4-1/16" X 5000# X
    (3)- 2-1/16" X 5000#, 5 Way,

    Complete W/Studs & Nuts.
    #5. 2 Spools, 2-1/16" X 5000# X 27-1/8"
    Long
    #6. 1 Spool, 4-1/16" X 5000# X 12' Long
    #7. 1 Double Studded Adapter, 2-1/16" X
    5000# X 2-1/16" X 5000# X 8'
    #8. 1 Buffer Tank Manifold, 8" O.D. X 6" I.D. X
    9'-9-1/4" Long
    #9. 1 Skid, 3-1/8" X 5000# Choke Manifold
    Skid.
    TRIPLEX MUD PUMP #1: #1 TRIPLEX MUD PUMP: (1)- F-1000 STYLE
    TRIPLEX MUD PUMP , RATED AT 1000 INPUT HP, WITH PUMP POWER BEING PROVIDED
    BY ONE (1)-INDEPENDENT CAT D-398 DIESEL ENGINE, (REBUILT IN OCTOBER 2006)
    AND COMPLETE WITH NEW HIGH AMBIENT TEMPERATURE RADIATOR, AND FORGED STEEL
    FLUID END, W/ QUICK CHANGE VALVE & CYLINDER HEAD CAPS, CHARGE PUMP,
    PULSATION DAMPENER AND SUCTION / DISCHARGE MANIFOLDS, 5,000# SHEAR RELIEF
    VALVE, PRESSURE GAUGE AND LINER WASH PUMP, WITH ALL OF THE ABOVE BEING
    SKIDDED & MASTER SKIDDED ON OILFIELD TYPE SKIDS. (PUMP WAS NEW IN 2006)
    2 PIT MUD SYSTEM: SHALE TANK OF APPROXIMATELY 450 BBLS, MEASURING
    8' HIGH X 8' WIDE X 40' LONG, WITH 4 COMPARTMENTS, 3" DROP SLOPED BOTTOM TO
    DUMPS, SINGLE TANDEM SHALE SHAKER, DESILTER, LOW PRESSURE PLUMING.
    SUCTION TANK OF APPROXIMATELY 450 BBLS, 8' HIGH X 8' WIDE X 45' LONG, WITH 3
    COMPARTMENTS, WITH 3" DROP SLOPED BOTTOM TO DUMPS. PITS ARE COMPLETED USING
    (2)- BRANDT 10 HP MUD AGITATORS, (2)- 5' X 6" CENTRIFUGAL PUMPS POWERED BY
    50 HP ELECTRIC MOTORS, MUD HOPPER , AND LOST CIRCULATION MATERIAL MIXER.
    GENERATOR SYSTEM: TWO (2) JOHN DEERE, 250 KW GENERATORS, COMPLETE WITH
    SWITCHGEAR AND TRANSFORMERS, QUINCY MODEL 325 STANDBY AIR COMPRESSOR W/
    ELECTRIC MOTOR, SHELVING FOR STORAGE AND LIGHTING, W/ ALL OF THE ABOVE BEING
    HOUSED IN A 8' WIDE X 12' HIGH X 40' LONG SKIDDED GENERATOR HOUSE.
    (GENERATORS WERE NEW IN 2006).
    AUXILIARY EQUIPMENT: ONE (1) AUTOMATIC DRILLER
    200 TON DRILL PIPE ELEVATORS
    DRILL PIPE & DRILL COLLAR
    SLIPS
    NEW 4-1/2" ELEVATORS
    AXX TONGS WITH HEADS UP TO
    13-5/8"
    NEW ACTION AIR KELLY SPINNER
    NEW ACTION AIR PIPE SPINNER
    STRAIGHT HOLE TOOL
    HAND TOOLS
    MISCELLANEOUS: HOSES,
    LIGHTS, STAIRS, STANDS & WALKWAYS.
    SPARE PART & EXPENDABLES FOR
    CABOT 900
    DRILL PIPE: 7,500' OF USED DRILL PIPE: 4-1/2" 0D, 16.60 lb/ft, RANGE -
    II, MIXED E AND G GRADE DRILL PIPE, W/ X-HOLE CONNECTIONS (CURRENTLY BEING
    USED WITH THE CABOT 900 RIG) & ASSOCIATED PIPE RACKS.
    Located in USA

    Price: $3,700,000

    SKYE SERVICE RIGS (Ref#10884N) New, US manufactured
    A. Skye 300
    Capacity: Drilling – 6,000', Workover – 10,000', Well service – 14,000', 96'
    x 180,000# mast, Detroit 60 series diesel engine, Allison transmission,
    Drawworks: 42 X 10 38 X 8
    Main drum Clutch: 24" 2-plate air friction outboard, Water splash brake
    cooling, Barrel: 16" x 38", Chain: 1 3/4" pitch single (oil bath), Shaft: 5
    3/4" diameter, Lebus grooving
    Sand drum Brakes: 38" diameter x 8" wide, forged steel; demountable,
    Clutch: 24" single plate air friction, Water splash brake cooling, Barrel:
    12 3/4" x 40", Chain: 1 3/4 pitch single, Shaft: 5" diameter, Capacity:
    14,600' - 9/16" 11,900 - 5/8"
    Carrier 4 axle Rear axles: 44,000 lb. tandem double reduction, Frame: Wide
    flanged beam, Front: Tandem axles rated at 20,000 lb. capacity each, Front
    axle suspension: Spring, Front tires: 16.5" x 22.5" duplex, Rear axle
    suspension: Walking beam, Rear tires: 11.00" x 20" off-highway tread, Rigged
    Out Gross Weight: appx 83,000 lb., Front: appx 38,000 lb., Rear: appx 45,000
    lb., (With basic rigging)
    Price: $875,000

    B. Skye 400
    Capacity: 6,000' drilling, 10,000' workover, 14,000' well service,96' x
    250,000# mast, Detroit 60 series diesel engine, Allison transmission,
    Drawworks: 42 X 10 38 X 8
    Main drum Clutch: 24" 2-plate air friction outboard, Water splash brake
    cooling, Barrel: 16" x 38", Chain: 1 3/4" pitch single (oil bath), Shaft: 5"
    diameter, Lebus grooving
    Sand drum Brakes: 38" diameter x 8" wide, forged steel; demountable,
    Clutch: 24" single plate air friction, Water splash brake cooling, Barrel:
    12 3/4" x 40", Chain: 1 3/4 pitch single, Shaft: 5" diameter, Capacity:
    14,600' - 9/16" 11,900 - 5/8"
    Carrier 5 axle Front: Tandem axles rated at 20,000 lb. capacity each, Front
    axle suspension: Spring, Rear axles: 46,000 lb. tandem double reduction,
    Rear axle suspension: Walking beam, Front tires: 16.5" x 22.5 " ,duplex
    (38565R224), Rear tires: 11.00" x 20" off-highway tread (11R22.5), Frame:
    Wide flanged beam, Rigged Out Gross Weight: appx 93,000 lb., Front: appx
    38,000 lb., Rear: appx 45,000 lb.,
    *With basic rigging
    Price: $975,000

    C. Skye 500
    Capacity: Drilling – 8,000', Workover – 14,000', Well service – 18,000',
    104' x 250,000# mast, Allison transmission, Detroit 60 series diesel engine,
    Drawworks: 42 X 12 42 X 8
    Main drum Clutch: 24" 3-plate air friction outboard, Water splash brake
    cooling, Barrel: 16" x 38", Chain: 1 3/4" pitch double (oil bath), Shaft: 6
    1/2" diameter, Lebus grooving
    Sand drum Brakes: 42" diameter x 8" wide, forged steel; demountable,
    Clutch: 24" single plate air friction, Water splash brake cooling, Barrel:
    16" x 43", Chain: 1 3/4 pitch double, Shaft: 5 3/4" diameter, Capacity:
    16,500' - 9/16" 13,400 - 5/8"
    Carrier 5 axle Rear axles: 44,000 lb. tandem double reduction, Frame: Wide
    flanged beam, Front: Tandem axles rated at 20,000 lb. capacity each, Front
    axle suspension: Spring, Front tires: 18" x 22.5" duplex, Rear axle
    suspension: Walking beam, Rear tires: 11.00" x 20" off-highway tread, Rigged
    Out Gross Weight: appx 93,000 lb., Front: appx 40,000 lb., Rear: appx 44,000
    lb., Drag: 20,000 lb.
    *With basic rigging
    Price: $1050,000

    D. Skye 700
    Drilling/Workover rig
    Capacity: Drilling – 10,000', Workover – 16,000', Well service – 22,000',
    112' x 350,000# mast, (2) Allison CLT 5860 transmissions, (2) Detroit 60
    series diesel engines, Drawworks: 42 X 12
    Main drum Brake: 42" diameter x 12" wide, Water circulating brake cooling
    with external connections, Chain: 1-1/4" pitch triple (oil bath), Airflex
    (Fawick) clutches, Shaft: 6-1/2" diameter, Lebus grooving, Barrel: 18 x 43
    Carrier 6 axle Front: Triple axles rated at 20,000 lb. capacity each, Front
    axle suspension: Spring, Front tires: 18" x 22.5" duplex, Rear axles: 50,000
    lb. tandem double reduction, Rear axle suspension: walking beam, Third rear
    axle: 20,000 lb. capacity air bag, Rear tires: 11.00" x 20" off-highway
    tread, Frame: High tensile allow wide flanged beam, Rigged Out Gross Weight:
    115,000 lb., Front: appx 55,000 lb., Rear: appx 60,000 lb.
    (With drilling line, block, and guylines)
    Price: $2,385,000

    CT-03 (Ref#4Na) Self-propelled carrier – tri-axle drive with 2 steering
    axles, 8'6" wide, 13'6" clearance height, approx 50' long, Detroit Series
    60, 435 hp engine, 4 hydraulic leveling jacks, +20 minutes to level, set
    jacks, raise mast and set injector in place
    Mast: Free standing – 100k lb capacity, Approx 60' from GL to bottom of
    crown
    100k lbs drawworks and traveling block (4 part line), Can Run Range II or
    III casing (max length depends on wellhead height), 6k lbs aux winch,
    Folding work floor at rear of carrier
    Injector: 80k lbs pull, 30k lbs snubbing, 1-1/2" to 3-1/2" CT sizes
    Reel Capacities: Removable reel/level wind assembly, large (154") + small
    (142") reel sizes available, core expander for reels (used as needed to
    extend CT life). Approx capacity: 2-3/8" – 4800' to 7000', 2-7/8" 3300' to
    6600'
    Note that clearance height with the larger reel installed increases to over
    14' unless haled separately and dropped in place on site
    BOP's: 5-1/8", 5k psi Van Oil (onboard rack), accumulator and controls
    built-in
    Note that 7-1/16" BOP's can be used, but must be transported separately
    Also includes: regular diameter reel, gooseneck trailer, combination
    trailer (Genset; doghouse), light stand, motor head assembly, mud system
    (6000 gal solid separation system with mud pump), handling tools and current
    associated spare parts.
    Currently working.
    Price: $4,750,000

    CT-05 (Ref#4Nb) Self-propelled carrier – tri-axle drive with 2 steering
    axles, 8'6" wide, 13'6" clearance height, approx 50' long, Detroit Series
    60, 435 hp engine, 4 hydraulic leveling jacks, +20 minutes to level, set
    jacks, raise mast and set injector in place
    Mast: Free standing – 100k lb capacity, Approx 60' from GL to bottom of
    crown
    100k lbs drawworks and traveling block (4 part line), Can Run Range II or
    III casing (max length depends on wellhead height), 6k lbs aux winch,
    Folding work floor at rear of carrier
    Injector: 80k lbs pull, 30k lbs snubbing, 1-1/2" to 3-1/2" CT sizes
    Reel Capacities: Removable reel/level wind assembly, large (154") + small
    (142") reel sizes available, core expander for reels (used as needed to
    extend CT life). Approx capacity: 2-3/8" – 4800' to 7000', 2-7/8" 3300' to
    6600'
    Note that clearance height with the larger reel installed increases to over
    14' unless haled separately and dropped in place on site
    BOP's: 5-1/8", 5k psi Van Oil (onboard rack), accumulator and controls
    built-in
    Note that 7-1/16" BOP's can be used, but must be transported separately
    Also includes: regular diameter reel, gooseneck trailer, combination
    trailer (Genset; doghouse), light stand, motor head assembly, mud system
    (6000 gal solid separation system with mud pump), handling tools and current
    associated spare parts.
    Currently working.
    Price: $4,750,000

    CT-001 MASTLESS COILED TUBING DRILLING RIG (Ref#4Nc) General
    Specifications: Trailer Mounted Self Contained Coiled Tubing Unit, Hydraulic
    Fluid Pump, 8' 6" wide, 14' 6" clearance height, approx 50' long, Detroit
    Series 40, 435 hp engine, Manual Leveling Jacks – 4, +20 minutes to level,
    set jacks and set injector in place. 25' gooseneck trailer with oil and
    supplies, Mud Tank system, shaker and sander, Hyster Unit, Total Footprint –
    85' x 110', 20 ton boom truck needed to rig up. Injector: 80k lbs Stewart
    and Stevenson pull, 40k lbs snubbing, 2 5/8" HS 70.190" wall 4050', 96"
    gooseneck. Reel Capacities: Approximate Capacity: 2 3/8" – 4800' to 9800',
    2 5/8" – 4000' to 7500', 2 7/8" – 3300' to 6600'. BOP's: Operator to
    provide. * Note that clearance height with the larger reel installed
    increases to over 14' unless hauled separately and dropped in place on site.
    Price: $2,500,000
  • PT SUKSES ADHI MULTI PERKASA

    GENERAL SPARE PART AND OIL RIG SUPPLAYER , CHEMICAL, PIPPING, STEL CONTRUCTION , HEAVY EQUIPMENT , TRANSPORTATION , Etc

    Contact person
    Engr. LUDHY YUSUF, ST
    081554770406


          

Top Tags - Weblog

[no tags]

Weblog Archives

Don't worry - your calendar is here… to see it in action just click "Save" above and refresh the page.

About Me

[no info]

Blogrings

[no blogrings]

Pulse

ptsuksesadhimultiperkasa has no pulse!...

Recommended

[no recommendations]